- In-House Manufacturing
- Since 1994
- Our Installers, Not Subcontractors
Architectural
Aluminum Driveway Gates
One Team. From Design to Installation. No Handoffs.
Built to last decades without repainting, rusting, or warping. Engineered for safety. Built for the highest standards.
Your Custom Driveway Gate Starts Here
Ready to Build? Call Now.
(800)562.5770
AIA & CAI
Affiliated
- In-House Manufacturing
- Since 1994
- Our Installers, Not Subcontractors
Architectural
Aluminum
Driveway gates
One Team. From Design to Installation. No Handoffs.
Built to last decades without repainting, rusting, or warping. Engineered for safety. Built for the highest standards.
Your Custom Driveway Gate Starts Here
AIA & CAI
Affiliated
- In-House Manufacturing
- Since 1994
- Our Installers, Not Subcontractors
Architectural
Aluminum Driveway gates
One Team. From Design to Installation. No Handoffs.
Built to last decades without repainting, rusting, or warping. Engineered for safety. Built for the highest standards.
AIA & CAI
Affiliated
The Reality Most People Don't See
Don't Fall on the Bad-Gate Trap
Here's what happens when you prioritize cheap over smart.
The rusty gate trap
- Rust and corrosion problems of iron gates and fences makes their maintenance costs increase over time and may even need to be replaced.
- Iron and steel gates rust in 3-5 years in Southern California's coastal climate.
- Rust doesn't just look bad. It stains your stucco, your siding, your entire home's curb appeal.
- Every time guests arrive, they see a corroded, neglected entrance.
- Resale appraisers notice it immediately. Your property value goes down before you even know it.
The Wood Gate Trap
- Wood gates need annual staining or sealing to survive Southern California's dry heat and occasional moisture. Skip a year and the damage accelerates.
- Without maintenance, wood warps, splits, and cracks — especially in direct sun. Your gate stops closing properly within 3-5 years.
- Maintenance costs stack up fast: $500-$1,200 per year for staining and sealing. Over 10 years, you'll spend $5,000-$12,000 just keeping it from falling apart.
- Wood attracts termites, carpenter ants, and rot. Once pests move in, the structural integrity is compromised. Replacement is the only fix.
The Vinyl gate trap
- Vinyl looks acceptable — until California sun beats it into submission. Within 5 years, UV exposure turns pristine white into chalky gray. No fix. Only replacement.
- Extreme heat warps vinyl panels, causing gates to sag, bind, or fail to close properly. Once warped, there's no fixing it — only replacement.
- Vinyl can't be repainted or refinished. When it fades to a chalky gray or yellows from sun damage, your only option is full replacement.
- Resale buyers see vinyl as the budget option. It doesn't elevate your property's curb appeal — it signals cost-cutting, not quality investment.
The Aluminum Advantage
Why Mulholland Aluminum Outlast Iron, Wood and Vinyl
- Mulholland uses aerospace-grade aluminum alloys — the same material trusted in aircraft construction for its strength-to-weight ratio and corrosion resistance. Your gate is built from engineering-grade material designed to withstand extreme conditions without compromising structural integrity.
- When you choose aluminum, your gate won't rust or corrode — even in coastal salt air or humid climates. The smart choice for a pristine finish that lasts decades.
- In California's wildfire zones, aluminum fencing is non-combustible and meets Zone 0 defensible space requirements. While wood fencing ignites and spreads flames, aluminum creates a fire-resistant perimeter that can help protect your home during ember storms.
- Mulholland's electrostatic powder-coat fuses to the aluminum at a molecular level, creating a water-tight, corrosion-resistant finish that outlasts painted iron, stained wood, and fading vinyl.
- When appraisers evaluate your property, they recognize aluminum as a premium, low-maintenance investment that adds lasting value. Buyers see a gate that looks pristine after decades — not deferred maintenance like peeling paint, rotting wood, or faded vinyl. Your curb appeal stays intact, protecting your property's resale value.
The Truth Nobody's Telling You
The Real Cost Is Not Today.
The Real Cost Is How Many Times You'll Replace It.
With Mulholland, you invest once. And never again.
- Most people compare gates by upfront price. The smart ones compare gates by lifetime cost.
- The cost difference between Mulholland and cheap alternatives? Usually $3,000 to $8,000 more upfront. Spread over 30 years, that's $100-$267 per year.
- In those same 30 years, cheap gates cost you $15,000-$25,000 in replacements and maintenance.
- Do the math: Mulholland saves you money. But more importantly? You never think about your gate again.
- No Rust — Aluminum never corrodes, never stains your home
- No Rot — Won't decay like wood, won't crack like vinyl
- No Repainting — Powder-coated finish is scratch-resistant, water-tight, permanent
- No Contractor Drama — Same in-house team from design to installation
- No Maintenance Treadmill — Set it and forget it for 30+ years
Real Clients. Real Results.
12 Years of Trust.
Our customers' success is at the core of everything we do. High standards aren't a promise — they're the only way we know how to work.
From swing gates to sliding gates — every gate we install is custom-fabricated to your driveway and built to secure your property for decades.
- In-house manufacturing and installation — no subcontractors
- 30 years in business since 1994
- Expertise in hilly and challenging SoCal terrain
- Powder-coated aluminum that requires low maintenance
- Consistent team, consistent standard
Trusted by Southern California Homeowners for +30 Years.
Our Reputation Was Built One Driveway Gates at a Time. Hear directly from the homeowners who made it happen.
At Mulholland, every gate is custom-fabricated in aluminum — designed around your driveway, installed by our in-house team. No off-the-shelf sizing. No subcontractors.
Aluminum Driveway Gates.
We design it. We build it. We install it.
Built for Security. Designed for Life.
- Secure your property entrance.
- Elevate your curb appeal.
- Finish the property right.
Aluminum Driveway Gates Change How You Feel At Home.
Built for Security. Designed for Life.
- Secure your property entrance.
- Elevate your curb appeal.
- Finish the property right.
Find Your Driveway Gate.
Every style is custom-fabricated to your driveway opening. Browse the collection and find the one built for your property.
01
Profile 24 Driveway Gate
The most adaptable driveway gate in the collection. 24mm powder-coated aluminum slats available in horizontal or vertical orientation, six profile widths, and 20+ color options — for driveways, slopes, and properties that suit any home style.
- Professional installation by our in-house team
- 100% aluminum — no rust, no rot, no repainting
- Powder-coated finish built to outlast the elements
- Fabricated to your exact driveway opening dimensions
- Horizontal or vertical orientation available
- Custom laser-cut address signs available
02
Mixed 24 Driveway Gate
Different Profile 24 widths combined in a single driveway gate panel — creating rhythm, contrast, and a design that's entirely your own. Specify your combination or choose from proven layouts. Available horizontal or vertical.
- Professional installation by our in-house team
- 100% aluminum — no rust, no rot, no repainting
- Powder-coated finish built to outlast the elements
- Fabricated to your exact driveway opening dimensions
- Mix profile widths for a fully custom design
- Custom laser-cut address signs available
03
Mixed 24 with Glass Driveway Gate
Profile 24 aluminum slats integrated with laminated glass panels — the clean lines of the 24 Series with added depth and light. The driveway gate that brings openness to your entrance without sacrificing security where you need it.
- Professional installation by our in-house team
- 100% aluminum — no rust, no rot, no repainting
- Powder-coated finish built to outlast the elements
- Fabricated to your exact driveway opening dimensions
- Laminated glass panels — safe and durable
- Custom laser-cut address signs available
04
Solid Driveway Gate
No gaps. No compromise. The Solid Driveway Gate is built for driveways where full visual privacy is the priority — without sacrificing elegance. Perfect for corner lots, exposed properties, and security-focused applications where complete screening matters.
- Professional Installation
- 100% aluminum — no rust, no rot, no repainting
- Powder-Coated finish for long-term durability
- Fabricated to your exact driveway opening dimensions
- Full privacy — zero visibility through the gate
05
Solid Mixed with Glass Driveway Gate
The structure of a solid driveway gate, softened by laminated glass inserts. Full privacy where you need it, controlled light where you want it. Ideal for driveways and properties where both security and openness matter.
- Professional installation by our in-house team
- 100% aluminum — no rust, no rot, no repainting
- Powder-coated finish built to outlast the elements
- Fabricated to your exact driveway opening dimensions
- Laminated glass inserts — safe and durable
06
Glass Black Driveway Gate
Aluminum frames with black laminated glass inserts — maximum visual impact, maximum privacy. Available in multiple row configurations. Ideal for driveways and properties where bold design meets structural integrity.
- Professional Installation
- 100% Aluminum
- Powder-Coated finish for long-term durability
- Black laminated glass — safe, durable, striking
- Fabricated to your exact driveway opening dimensions
- Black laminated glass — safe, durable, striking
- Custom laser-cut address signs available
07
Glass White Driveway Gate
The same laminated glass architecture as the Black series — in white. Lighter, airier, and equally striking. Ideal for coastal properties, contemporary homes, and driveways where brightness and openness are part of the design.
- Professional Installation
- 100% aluminum — no rust, no rot, no repainting
- Powder-Coated finish for long-term durability
- Fabricated to your exact property dimensions
- White laminated glass — bright, clean, striking
- Custom laser-cut address signs available
08
Laser Cut Driveway Gate
40+ precision-cut aluminum patterns — from geometric to organic — or bring your own custom design. The driveway gate that becomes the feature of your property entrance. Every panel cut with computer-calibrated accuracy, and no two properties need to look alike.
- Professional Installation
- 100% Aluminum
- Powder-Coated finish for long-term durability
- Fabricated to your exact property dimensions
- 40+ patterns or fully custom design available
- Custom laser-cut address signs available
09
Wood-Like Driveway Gate
The grain and warmth of wood — in aluminum. Available in three patterns: walnut, oak, and cedar. No rot, no splitting, no staining. The driveway gate that looks identical to wood through appearance — the aesthetic without the upkeep.
- Professional Installation
- 100% Aluminum
- Powder-Coated finish for long-term durability
- Fabricated to your exact property dimensions
- Available in walnut, oak, and cedar patterns
- Matches Wood-Like gates and fencing for a cohesive look
10
Hi-Tech Frameless Driveway Gate
Narrow horizontal profiles in a frameless configuration — engineered for contemporary homes. The cleanest driveway gate in the collection. No visible frame, no visual interruption — just precision aluminum that lets your property's architecture speak for itself.
- Professional Installation
- 100% Aluminum
- Powder-Coated finish for long-term durability
- Fabricated to your exact property dimensions
- Frameless configuration — zero visual interruption
- Custom laser-cut address signs available
11
Hi-Tech Vertical Driveway Gate
Narrow vertical profiles in a framed or frameless configuration — engineered for contemporary homes. Security without completely obscuring the view. Clean, minimal, and architecturally precise — the driveway gate that disappears into the design.
- Professional Installation
- 100% Aluminum
- Powder-Coated finish for long-term durability
- Fabricated to your exact property dimensions
- Available in framed or frameless configuration
- Custom laser-cut address signs available
12
Hi-Tech 45° Driveway Gate
The Hi-Tech profile installed at a 45° downward angle — adding privacy on driveways and property entrances without sacrificing airflow or natural light. Available in framed horizontal configuration only. A modern design that works harder than it looks.
- Professional Installation
- 100% Aluminum
- Powder-Coated finish for long-term durability
- Fabricated to your exact property dimensions
- 45° angle adds privacy without blocking airflow
- Custom laser-cut address signs available
13
Tongue & Groove Driveway Gate
Interlocking aluminum profiles that create a solid, textured surface with subtle dimension. Available in smooth, half-and-half, and solid hi-tech configurations. Bridges the gap between full privacy and architectural interest — ideal for property entrances, elevated driveways, and driveway dividers.
- Professional Installation
- 100% Aluminum
- Powder-Coated finish for long-term durability
- Fabricated to your exact property dimensions
- Available in smooth, half-and-half, and solid hi-tech configurations
- Custom laser-cut address signs available
14
Classic 48 Driveway Gate
Clean, evenly spaced aluminum slats in a traditional horizontal layout — the most understated expression of the Mulholland driveway gate system. Suited for property entrances, driveways, and gates where simplicity is the point.
- Professional Installation
- 100% Aluminum
- Powder-Coated finish for long-term durability
- Fabricated to your exact property dimensions
- Evenly spaced horizontal slats — clean, classic profile
- Custom laser-cut address signs available
What's Included
Everything you need for a complete driveway gate installation
- Custom design consultation — in-person or virtual
- On-site measurement of your driveway opening, slope, and swing/slide clearance
- Permit coordination (where required)
- Professional installation by our in-house team
- Post-install walkthrough and client sign-off
- Warranty documentation — materials and workmanship
What's Included
Everything you need for a complete driveway gate installation
- Custom design consultation — in-person or virtual
- On-site measurement of your driveway opening, slope, and swing/slide clearance
- Permit coordination (where required)
- Professional installation by our in-house team
- Post-install walkthrough and client sign-off
- Warranty documentation — materials and workmanship
Why Homeowners Trust Mulholland
Direct Manufacturer
We don’t outsource. We don’t broker. We manufacture it ourselves. Which means tighter quality control, faster timelines, and no middleman markup baked into your price.
No Subcontractors
Installed by our internal team for a more consistent process.
One-Stop Accountability
From measurement to fabrication to installation, your project stays with one team throughout the process.
Here's what we know about cheap gates:
- Cheap gates start cheap. They end expensive.
- Within 3-5 years, you're replacing them, repainting them, or dealing with rust, sagging, or rotting.
- By year 20, you've replaced it 2-3 times over.
- By year 30? You've paid double or triple the cost of a Mulholland gate.
The math is simple.Here's what you get with Mulholland:
- We price based on value, not on a race to the bottom.
- Our gates last 30+ years. Cheap gates last 5-8 years.
- The math is simple. The peace of mind is priceless.
- Real warranty backed by the team who built it
Join the smart owners. Make the decision once. Never think about it again.Witness The Mulholland Wow Effect
Drag to reveal the transformation
Frequently Asked Questions
Product & Installation
Can my project be installed in one day?
Yes. Most standard installations are completed in a single day, thanks to our in-house fabrication, early-start teams, and coordinated logistics. Our crews often begin loading as early as 5:00 AM to ensure on-time, same-day completion.
Do you install on hilly or uneven terrain?
Yes — we’re known for it. Our extensive experience in areas like the Mulholland hills makes us one of the most trusted names for hillside work. We use specialized engineering and our patented IST system to ensure stable, seamless installations on challenging terrain.
Are your gates custom-measured and custom-built?
All Mulholland gates are custom-measured and custom-built to ensure a perfect fit and smooth operation — no one-size-fits-all solutions.
What is the installation process like?
From consultation and measurement to engineering, fabrication, powder coating, and final installation, every step is handled by our dedicated teams. The result? A seamless, high-quality experience from start to finish.
Can I match the gate or fence to my existing design?
Yes. We offer extensive design options including glass panels, wood-tone aluminum, and laser-cut details. Our design consultants help create elegant solutions that harmonize with your property.
What's special about your pergolas?
We offer unmatched design flexibility. Our pergolas can mimic wood, feature laser-cut panels, glass, trellises, lighting, and automatic louvers — all in custom powder-coated finishes. No other U.S. company offers our level of design and customization.
What does a typical project cost if I want to upgrade my property?
It depends on the size of your property and the scope of work. Many homeowners, architects, and developers invest between $30,000–$300,000 to enhance their properties with gates, fences, pergolas, equipment covers, and garage doors. Many use our flexible financing options to manage the cost over time.
Materials & Environmental
Why aluminum over iron or wood?
Aluminum is strong, rust-proof, recyclable, and maintenance-free. It offers long-term beauty and value.
Is your powder coating environmentally safe?
Yes. Our powder coating system is non-toxic and engineered specifically for aluminum, ensuring a safe, long-lasting finish.
Are your products made in the USA?
Yes. All products are fabricated in our Canoga Park, California facility.
Are your products made in the USA?
Yes. All products are fabricated in our Canoga Park, California facility.
Pricing & Payment
Do you offer financing?
Yes. With a 24-month no-interest option or up to 10-year terms with no prepayment penalty. Rates start around 8.99%, and payments average about $190 per $10K. It’s a smart way to complete larger projects and add value to your home.
Is there a consultation or design fee?
Sometimes, yes. However, in most cases the fee is waived for serious inquiries. Each consultation offers high-value design insight and personalized support.
Do you require a deposit?
Yes. Your initial payment secures materials and kicks off fabrication. Once measurements are confirmed, your install date is scheduled within two business days.
What is your cancellation policy?
Cancel within three business days at no cost. After that, we only charge for work already performed — fair and simple.
Are your prices competitive?
Yes. We offer the best price-to-value ratio. Our architectural aluminum products include custom hardware, powder coating, magnetic locks, and patented components — crafted in the U.S. When comparing quality and durability, we lead the industry.
Service & Maintenance
Do you offer warranties?
Yes. Every product is backed by a written warranty and our ongoing support. We stand behind everything we build.
What if I need repairs later?
We offer affordable service support even beyond your warranty. Most calls are resolved for $500 or less.
Do aluminum products rust?
No. Aluminum does not rust like iron or steel. It is highly durable and outperforms wood and iron in most outdoor conditions.
Near the ocean, salt can build up on the surface, so regular rinsing with fresh water is recommended to protect the finish.
What if something is damaged during shipping or installation?
We stand by our quality. If something matters and isn’t perfect, we fix it. That’s our promise.
Fire Safety
Are your products fire-rated or fire-resistant?
Yes. Our aluminum systems are non-combustible and have been field-tested in California wildfires, often remaining intact where other structures were lost.
Are your products fire-rated or fire-resistant?
Yes. Our aluminum systems are non-combustible and have been field-tested in California wildfires, often remaining intact where other structures were lost.
Service Area
Do you service San Diego or other regions?
Yes. We serve Los Angeles, Ventura, Orange, and San Diego Counties, with limited services in Palm Desert and the Bay Area for larger projects.
Can I combine materials like glass and aluminum?
Yes. We offer beautiful hybrid solutions combining glass, wood-tone aluminum, lighting, and more.
Can I install lighting or automation?
While we don’t handle the installation of electrical components, our products are designed for easy integration with automation systems.
Can I add more to my project later?
Most likely, yes. We keep detailed project records, including colors and design specs, even 10+ years later. That means you can expand with matching products — gates, fences, pergolas, railings, or garage doors — whenever you’re ready.
We're Not the Cheapest Option. Here's Why That's Good.
If you're looking for the lowest possible price, we're probably not the right fit If you're looking to solve this problem once and be done with it, read on.